Nasty, but try and rip out anything useful before it makes its last journey.admin wrote:... one heading for the bin after it crashed its heads and scratched a nice neat circle on the disk surface.
WANTED: 5.25" disk drives
Re: WANTED: 5.25" disk drives
Re: WANTED: 5.25" disk drives
You can work around the broken disk change line with
floppycontrol --broken_dcl /dev/fd0
something like that, anyway.
floppycontrol --broken_dcl /dev/fd0
something like that, anyway.
Re: WANTED: 5.25" disk drives
Cool - I will look that up and try it - you don't have the /etc/mediaprm settings to hand do you?
Simon Hardy
Re: WANTED: 5.25" disk drives
I'm not sure I ever configured it properly, just did the appropriate setfdprm and floppycontrol stuff each time. I don't think you ever need to do more than set "ss dd sect=18 cyl=40 ssize=256" and then broken_dcl as above - pretty much as you'd expect.
It'll even format disks for you after that - although IIRC it wrongly reports that it's formatting 9 sectors per track even when it's doing 18.
It'll even format disks for you after that - although IIRC it wrongly reports that it's formatting 9 sectors per track even when it's doing 18.
Re: WANTED: 5.25" disk drives
Depending on what version of fdparm you have, I have whatever is the stock for SuSE 10.0, the following will work....
These go in /dev/fdprm you can the do for example :
setfdprm ddosSS40-5 /dev/fd0
Cheers.
Phill.
Code: Select all
#
# DragonDos 40 track disk in 80 track drive (eg 1.2M).
# for 40 track in 40 track drive, set the 6th column to
# 0 instead of 1 (like the 80 track formats below !).
#
# -5 are for 5.25", -3 are for 3.5"
#
ddosSS40-5 360 9 1 40 1 0x2A 0x39 0xDF 0x50
ddosDS40-5 720 9 2 40 1 0x2A 0x39 0xDF 0x50
ddosSS40-3 360 9 1 40 0 0x2A 0x3A 0xDF 0x50
ddosDS40-3 720 9 2 40 0 0x2A 0x3A 0xDF 0x50
#
# DragonDos 80 track disks in an 80 track drive (eg 720K,1.2M,1.44M)
#
ddosSS80 720 9 1 80 0 0x2A 0x3A 0xDF 0x50
ddosDS80 1440 9 2 80 0 0x2A 0x3A 0xDF 0x50
stss360 720 9 1 80 0 0x2A 0x02 0xDF 0x50
setfdprm ddosSS40-5 /dev/fd0
Cheers.
Phill.
Re: WANTED: 5.25" disk drives
Yeah that sounds like it could be the problem, also check for dry solder joints on the sensor, or if it's an optical sensor, there may be a LED to go with it also.admin wrote:They keep reseting pin 34 (DSK CNG / READY) randomly which linux then reports as the disk being changed whilst I try to read it. The jumpers are all set for AT mode working (DS1, DC etc) but I think the sensor needs replacing.
I don't think that pin 34 is connected on the Dragon, so I guess either will work since the signal is an output from the drive. Cirtainly PC 1.44MB 3.25" drives work fine (with 720K media or course).These are being used on a PC to read Dragon disks -The Dragon uses XT mode (Ready on pin 34 and the PC used AT mode Disk Change on pin 34) - some drives don't have jumpers to change this - hence I have a load of drives for my Dragon which are that old they only operate in XT mode (which is what the Dragon is expecting or at least it seems that way).
Scope the line, change the disk and see if you get a low pulse....if so it's disk change....The TEAC drives don't appear to have a jumper to control pin 34, so not sure yet which way they are wired...
I actually tested a bunch of drives on the Dragon this afternoon, since that's what I thought you needed, from your original posts, some of them would read disks I formatted on my known working drive.
But I could get none to format a disk (with Superdos), could just be jumpers need playing with.
However from later posts it looks like you are looking for a PC 360K drive, it looks like several of the drives may indeed be 360K or 1.2M drives, though I want to hold onto the 1.2M drives
Looks like I need to test them in a PC, if I get a couple of workers you're more than welcome to one if you need it.
BTW you wouldn't happen to be imaging the Flex/OS9 disks that recently sold on ebay are you......
Cheers.
Phill.
Re: WANTED: 5.25" disk drives
"BTW you wouldn't happen to be imaging the Flex/OS9 disks that recently sold on ebay are you......"
I *might* be
I *might* be
Simon Hardy