Guys,
Sorry, I have been neglecting to post here of late, but just wanted to let you know that a few more Oojamaflips are available. These are the internal boards which extend the cartridge port, giving one inside (but upside down) port, and retaining an external port.
Boards and components only supplied. Self build. Fixings into Dragons of the boards and/or accessories are the end user's responsibility.
Full details here: https://www.dragonplus-electronics.co.u ... it-version
N.B. not functionally compatible with Coco 1 due to -12V being present on Coco 1 cartridge port.
N.B. not guaranteed (or indeed even expected) to physically fit into Coco 2 & 3 cases.
Cheers
John
More Oojamaflips ready
Re: More Oojamaflips ready
I think I may be ordering one, as having the CoCoPSG internally and a disk controller or the DragonMMC on the side, makes it a nice dev station.
Re: More Oojamaflips ready
Thank you very much!
Re: More Oojamaflips ready
Hello John,
you pack with the oojamaflip has just arrived safely, thanks a lot!
Not in a hurry to build it immediately, because I am using
mini-MPI from Ed Snider or a standard Tandy multi-Pack when
I do need more than two cartridges ...
cheers
pere
you pack with the oojamaflip has just arrived safely, thanks a lot!
Not in a hurry to build it immediately, because I am using
mini-MPI from Ed Snider or a standard Tandy multi-Pack when
I do need more than two cartridges ...
cheers
pere
Re: More Oojamaflips ready
Hi John,
The postman just dropped my Oojamaflip, looking forward to build and test it!
The postman just dropped my Oojamaflip, looking forward to build and test it!
Re: More Oojamaflips ready
So, here's my beautiful finished Oojamaflip:
It works pretty well, and I'm most proud of how well the male edge connector turned out.
Fits well inside the case too.
Thanks John!
It works pretty well, and I'm most proud of how well the male edge connector turned out.
Fits well inside the case too.
Thanks John!
Re: More Oojamaflips ready
Thanks for letting me know Rob. It looks great. Although I think you may have the fingers upside down, as I can see "39" where pin 2 is. It won't affect usability at all though.
Hope you find it useful.
Cheers.
John
Hope you find it useful.
Cheers.
John