Dragon 200E Daughterboard
Posted: Sat Feb 09, 2019 12:16 am
OK - I've now sourced enough EPROMs to make up to seven [now FIVE] of the 200E VDG daughterboards available. As I offered the first four on the Facebook group, I thought I'd give this forum a headstart this time!
I've not built them yet - but have tested all EPROMs in my own board, so know they are good. Therefore these are available in a variety of options - i.e. kit form, fully built, optional ZIF socket (for daughterboard), optional spare 6847. Please be aware that your existing 6847 must be removed and socketed (standard socket included for this purpose).
All prices below include signed for postage - hence different costs for location. Please ask for a quote if you'd prefer it fully tracked. These prices are marginally higher than I offered for the first boards - purely because I screwed up the postage!
I reserve the right to double and triple check the shipping costs - it's too easy to screw up - but I will firmly agree it with you prior to accepting an order.
Please send me a forum message first, so that I can ensure I have enough parts to fulfil the order.
The board (actually, this is the original version - the new version can accept a ZIFF, and the jumper is shifted towards the edge more).
200E board without invert. Note not all characters are available with CHR$ command.
200E board with invert.
Poke to the low-res screen to see all available characters (or use a 200E ROM!!).
I've not built them yet - but have tested all EPROMs in my own board, so know they are good. Therefore these are available in a variety of options - i.e. kit form, fully built, optional ZIF socket (for daughterboard), optional spare 6847. Please be aware that your existing 6847 must be removed and socketed (standard socket included for this purpose).
All prices below include signed for postage - hence different costs for location. Please ask for a quote if you'd prefer it fully tracked. These prices are marginally higher than I offered for the first boards - purely because I screwed up the postage!
I reserve the right to double and triple check the shipping costs - it's too easy to screw up - but I will firmly agree it with you prior to accepting an order.
Please send me a forum message first, so that I can ensure I have enough parts to fulfil the order.
The board (actually, this is the original version - the new version can accept a ZIFF, and the jumper is shifted towards the edge more).
200E board without invert. Note not all characters are available with CHR$ command.
200E board with invert.
Poke to the low-res screen to see all available characters (or use a 200E ROM!!).