Dragon/Coco keyboard to USB for XRoar (PCB)
Posted: Sun May 07, 2023 1:26 am
I have some of the PCBs that plug into the Dragon keyboard connector that accept a PI Pico. Requires a 16 pin connector, a Pico and a Micro USB cable.
Or I could build it up as a finished board.
Contact me if you're interested in the bare PCB or the completed board with the Pico and connector soldered on and programmed.
Or I could build it up as a finished board.
Contact me if you're interested in the bare PCB or the completed board with the Pico and connector soldered on and programmed.