archive.worldofdragon.org

Hi there, Hope someone here might be able to help with a problem I'm having with Alldream wavs created in XRoar loading into a real Dragon32 (and vise-versa). When I save an Alldream wav file in XRoar it saves and loads just fine in XRoar, and if save an Alldream wav file in a real Dragon32 it saves...

Good afternoon, Thought you might like to have a copy of this. Salamander Software Nightflight Instructions... http://www.mediafire.com/?vb4vbjtag4d96h0 I've been slowly - that's very slowly - making a record of the few Dragon tapes, cartridges, etc that I have and didn't see this in the Manuals dow...

Well, got the eprom programmer quicker than expected and had it up-and-running in 5 minutes; I was expecting a long evening of reading the manual and destroying a chip or two. The rom image of Toolkit has been dumped from the chip and uploaded here.. http://www.mediafire.com/?b6chyu6a3wf917p I've te...

Good evening, Gentlemen! David, as you have the original cartridge, would you be so kind of testing the rom with XRoar? (xroar -cart toolkit.rom) Best regards, Rob Hello there, Tested Toolkit.rom with XRoar and it works OK - very nice; tried a few of the Toolkit commands and they worked fine. Nice ...

I used layer 20 "Dimension" in eagle. iTeadStudios CAM-job did the rest. SIVAVA Willem EPROM Programmer PCB50B. I think it's the same version, you'll get. It seems it never made it to a release 1.0. I could not get it right with a PCI-parallel adapter card. For programming eproms you need a paralle...

Try the following BASIC program to check that the joystick emulation is working correctly on your machine. ... 20 RX=JOYSTK(0):RY=JOYSTK(1) ... Thanks for the tip, this gave a hint as to what I might be doing wrong and help me get the Joystick to work. Initially when running the BASIC program nothi...

Found the link I was after: http://archive.worldofdragon.org/index.php?title=Tape%5CDisk_Preservation#Dumping_ROMS In the dumping roms section, it describes the general principal behind dumping the Dragon's system roms. However, for standard carts (looks like the Toolkit is just a rom and chip sele...

Where are you based David? I'm in the UK and can probably dump the ROM - would be a good thing to have preserved. Edit: just read the post above properly. If you run into problems, feel free to give me a shout. Otherwise, what programmer are you getting mate? I keep meaning to buy one but usually e...

Hi, A wee while ago I did try to remove the PCB from the case but, as you can see from the picture, it has been fixed down with silicone rubber. The silicon has also been put on the underside of the board, so I don't want to risk damaging it by hacking it apart - so no track side pictures for now......

Toolkit by Premier Microsystems, cartridge pictures and pdf of manual. Didn't see this on the archive site so thought you might like these pictures of the cartridge and a pdf of the manual - hopefully the pdf comes out OK as I didn't spend much time optimizing the scans. The manual has page 2 missin...