At least it was a very easy problem to solve
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
As you noted below yes currently with the 1.00 firmware you have to MDELETE and then MSAVE again. The next version of the firmware which I have in testing does the same as Dragondos and renames the file to (in this case) AUTOEXEC.BAK before saving AUTOEXEC.DGN. I'll try and do some testing over the weekend and do a release of this on the wiki early next week. Will of course try and remember to do a post here too....pser1 wrote:Hi,
I have been making some tests while reading the nice manual ...
I have found these problems, again it might be my fault
1) Once saved AUTOEXEC.DGN I don't know how to change it and then save again.
The only way I have found is saving with another name, opening the Explorer to DELETE
the old file, close again to load the 'new' basic and save as AUTOEXEC.DGN, finally
open again the Explorer to Delete the other file. Seems very awful to be right, don't you think so?
- This outlines that if the explorer had two more options (that I have not found) as DELETE and RENAME
we could do a lot of work from that window.
What format is the BIN file in? I think Explorer assumes that a .BIN file is a cartridge image, if this is the case I can see why you are getting the results you are, as it's probably being loaded at the wrong address.2) I have a folder with some bin files, e.g. DOWNLAND.BIN
I can play that game issuing
CWD"GAMES"
MLOAD"DOWNLAND.BIN"
EXEC
But from the Explorer once the cursor points to Downland.bin if I press Enter I get the loading message
but the program freezes or the screen goes wild.