Hi,
if you mean the last CoCo-SDC firmware version 1.16 from Darren Atkinson,
I tested it before it has been distributed by Ed Snider just to be sure
that it really worked with VDK files with a header 256 bytes long, as are all our
VDKs for DriveWire.
It works perfect, so we don't need to convert the VDKs into DSKs to use them
with our CoCo-SDC
The same file will work via Drivewire and from the SDC
If you have received or downloaded v1.16 (in a VDK file) you may install it
without problems. The new one is more flexible for Dragon users.
cheers
pere
A DOSPlus Extender for Drivewire & CoCo-SDC
- dragonmarce
- Posts: 35
- Joined: Sat Aug 15, 2015 7:26 am
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Yes. Thank you very much Pere!
It worked perfectly.
Cheers,
Marcelo
It worked perfectly.
Cheers,
Marcelo
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Hi Marcelo,
pleased to know.
If you have a CoCo and have used it with the CoCo-SDC you will have to download the document with the command names
for the Dragon. I changed them by addidng a leading 'S' for (DIR and DRIVE that became SDIR and SDRIVE)
But besides the name, there are some syntax differences and added options that can be of use too
I attach here the quick command overview for if it could be of help
cheers
pere
pleased to know.
If you have a CoCo and have used it with the CoCo-SDC you will have to download the document with the command names
for the Dragon. I changed them by addidng a leading 'S' for (DIR and DRIVE that became SDIR and SDRIVE)
But besides the name, there are some syntax differences and added options that can be of use too
I attach here the quick command overview for if it could be of help
cheers
pere
- Attachments
-
- _DP50Ext commands for DP50 and CoCo-SDC v0.24.E6.zip
- (6.53 KiB) Downloaded 365 times
- dragonmarce
- Posts: 35
- Joined: Sat Aug 15, 2015 7:26 am
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Hi Pere.
Thank you!. It's a great job and is very well explained.
Cheers,
Marcelo
Thank you!. It's a great job and is very well explained.
Cheers,
Marcelo
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Hello,
it seems that I am the only one Dragon user that has an environment containing the Tandy MultiPack
with both floppies and the CoCo-SDC.
I have been using it a lot of time, but always starting in MAP1 to be able to access the card and the floppies
without problems.
But lately I have been working right from the CoCo-SDC, from the ROM, working in MAP0
I have found two bugs that hanged the computer under that environment when issuing:
- SDIR or SDIR-
- SCOPY MEM @n
I have corrected them and created a new version v0.25.02
In the attached zip you will find these files:
DP50Ext v0.25.02 Updater.VDK - - - - to update the CoCo-SDC to the last version, just copy it in the card, 'mount' it and run UPDBANK.BAS
DP50Ext v0.25.02 x BCK.VDK - - - - - - to install in XRoar with Becker port
DP50Ext v0.25.02 x DW4.VDK - - - - - - to install in a real Dragon with Drivewire connexion
DP50BINS - - - - - - - - - - - - - - - - - - - - dweeb to be used in XRoar with Becker port
DP50XINS - - - - - - - - - - - - - - - - - - - - dweeb to be used in a real Dragon with Drivewire connexion
DP50PSR-BCK.rom - - - - - - - - - - - - - rom to be loaded in XRoar with Becker port (instead of installing from VDK or loading the dweeb)
DP50PSR-DW4.rom - - - - - - - - - - - - - rom to be burned for a real Dragon (requires 16k space and addressing)
_changes v0.25.02.txt - - - - - - - - - - a text doc explaining the various changes
cheers
pere
EDIT!!!
Carefull, the VDK containing the updater is OLD, you have to download the right version that is in next post, sorry!
it seems that I am the only one Dragon user that has an environment containing the Tandy MultiPack
with both floppies and the CoCo-SDC.
I have been using it a lot of time, but always starting in MAP1 to be able to access the card and the floppies
without problems.
But lately I have been working right from the CoCo-SDC, from the ROM, working in MAP0
I have found two bugs that hanged the computer under that environment when issuing:
- SDIR or SDIR-
- SCOPY MEM @n
I have corrected them and created a new version v0.25.02
In the attached zip you will find these files:
DP50Ext v0.25.02 Updater.VDK - - - - to update the CoCo-SDC to the last version, just copy it in the card, 'mount' it and run UPDBANK.BAS
DP50Ext v0.25.02 x BCK.VDK - - - - - - to install in XRoar with Becker port
DP50Ext v0.25.02 x DW4.VDK - - - - - - to install in a real Dragon with Drivewire connexion
DP50BINS - - - - - - - - - - - - - - - - - - - - dweeb to be used in XRoar with Becker port
DP50XINS - - - - - - - - - - - - - - - - - - - - dweeb to be used in a real Dragon with Drivewire connexion
DP50PSR-BCK.rom - - - - - - - - - - - - - rom to be loaded in XRoar with Becker port (instead of installing from VDK or loading the dweeb)
DP50PSR-DW4.rom - - - - - - - - - - - - - rom to be burned for a real Dragon (requires 16k space and addressing)
_changes v0.25.02.txt - - - - - - - - - - a text doc explaining the various changes
cheers
pere
EDIT!!!
Carefull, the VDK containing the updater is OLD, you have to download the right version that is in next post, sorry!
Last edited by pser1 on Sun Jan 31, 2016 11:14 am, edited 2 times in total.
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Hello,
sorry I uploaded an old version of the updater ... WHICH will burn the new version on the bank before the one you had chosen. DANGER !!!
Here is the NEW version
Thanks a lot to Steve Batson for having tested it and discovered the bank number difference!
cheers
pere
sorry I uploaded an old version of the updater ... WHICH will burn the new version on the bank before the one you had chosen. DANGER !!!
Here is the NEW version
Thanks a lot to Steve Batson for having tested it and discovered the bank number difference!
cheers
pere
- Attachments
-
- DP50Ext v0.25.02 Updater OK.zip
- (13.68 KiB) Downloaded 371 times
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Hi Pere, still enjoying your wonderful DOSPlus here on my Coco-SDC!
Just wondering, is there any way to make a program auto run when the Dragon is powered up? Tormod's modified Basic with DWLOAD supports AUTOLOAD.DWL - on switching on a Drivewire attached Dragon, it will look for and run that file from the DW server. Alternatively, is there a way to make an auto-running program on a disk? (analogous to the old autoexec.bat on MSDOS?).
Many thanks in advance - apologies if I've missed something obvious!
Tony
Just wondering, is there any way to make a program auto run when the Dragon is powered up? Tormod's modified Basic with DWLOAD supports AUTOLOAD.DWL - on switching on a Drivewire attached Dragon, it will look for and run that file from the DW server. Alternatively, is there a way to make an auto-running program on a disk? (analogous to the old autoexec.bat on MSDOS?).
Many thanks in advance - apologies if I've missed something obvious!
Tony
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Hi Tony,
I may be wrong, but I think that the only way will be having a disc with the 'starting' program
in the boot sector.
Anyway, having the CoCo-SDC connected and drive1 containing such a bootable disk, I am afraid
that you will have to write BOOT anyway ... to start that program
I have never tested that, so it should better be tried once.
The SDC accepts a config file (STARTUP.CFG) in which you 'mount' the disk you'd prefer to each drive (1-2)
for instance:
If you have problems to create a bootable disc, you can try the basic CAS I am attaching here
It will use 256 disk bytes (one sector) to call the program you should need to start, but will require that
you enter the BOOT command.
cheers
pere
I may be wrong, but I think that the only way will be having a disc with the 'starting' program
in the boot sector.
Anyway, having the CoCo-SDC connected and drive1 containing such a bootable disk, I am afraid
that you will have to write BOOT anyway ... to start that program
I have never tested that, so it should better be tried once.
The SDC accepts a config file (STARTUP.CFG) in which you 'mount' the disk you'd prefer to each drive (1-2)
for instance:
Code: Select all
0=FullPathFileName
1=FullPathFilename
It will use 256 disk bytes (one sector) to call the program you should need to start, but will require that
you enter the BOOT command.
cheers
pere
- Attachments
-
- MAKEBOOT-BAS.ZIP
- (1.09 KiB) Downloaded 336 times
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Hi Tony,
I have created a bootable disk with a simple basic program
and changed the file "STARTUP.CFG" to contain this line:
0=AUTOBOOT.VDK"
Being this the name I have given to the bootable disk.
When I start the Dragon with the SDC I get the intro message and the OK
so I must write BOOT and then the selected disk starts the chosen program.
The SDC documentation doesn't talk about starting a program, so this
should be done by the DOS ... something to be analyzed![Wink ;-)](./images/smilies/icon_e_wink.gif)
cheers
pere
I have created a bootable disk with a simple basic program
and changed the file "STARTUP.CFG" to contain this line:
0=AUTOBOOT.VDK"
Being this the name I have given to the bootable disk.
When I start the Dragon with the SDC I get the intro message and the OK
so I must write BOOT and then the selected disk starts the chosen program.
The SDC documentation doesn't talk about starting a program, so this
should be done by the DOS ... something to be analyzed
![Wink ;-)](./images/smilies/icon_e_wink.gif)
cheers
pere
- Attachments
-
- AUTOBOOT.ZIP
- (542 Bytes) Downloaded 352 times
Re: A DOSPlus Extender for Drivewire & CoCo-SDC
Thanks Pere, that worked perfectly! I hadn't spotted the mention of startup.cfg in the SDC manual.
So I wonder if it's possible to make the Dragon run something on power-up (beyond writing something into one of the rom slots in the SDC of course!). Tormod's DWLOAD code in his adapted basic rom does this over drivewire. Is this something your DWLOAD code in the DOSPlus rom could do? (Sorry, not trying to give you more work here, just thinking aloud!).
Alternatively, could DOS do it? I note that Eurohard's Dos4.0 offers 'autoboot at power up', according to this - http://dragon32.info/info/drgndos.html - but I've not found any docs.
Cheers, Tony
So I wonder if it's possible to make the Dragon run something on power-up (beyond writing something into one of the rom slots in the SDC of course!). Tormod's DWLOAD code in his adapted basic rom does this over drivewire. Is this something your DWLOAD code in the DOSPlus rom could do? (Sorry, not trying to give you more work here, just thinking aloud!).
Alternatively, could DOS do it? I note that Eurohard's Dos4.0 offers 'autoboot at power up', according to this - http://dragon32.info/info/drgndos.html - but I've not found any docs.
Cheers, Tony