I've ordered a couple of the extender/prototype boards Stewart mentioned here:
viewtopic.php?f=8&t=6051
No luck on finding a UK UHF tuner device from folk at work yet though. I did run across my Sinclair Microvision though. Maybe dangling a UHF cable near the aerial will be enough
Premier's Sprite Graphics Board
Re: Premier's Sprite Graphics Board
You can actually get edge connectors from Digikey, which can have IDC connectors pushed onto them. Might be simpler than having another board to do it.
Something like this...
https://www.digikey.co.uk/product-detai ... ND/4552097
Something like this...
https://www.digikey.co.uk/product-detai ... ND/4552097
Re: Premier's Sprite Graphics Board
I decoded all of the data area, and displayed all of the sprites and character set etc. I've uploaded it to the same thread as the ROM itself.
Re: Premier's Sprite Graphics Board
Would it in theory be possible to re-design the Sprite Graphics Board to be an internal add on board instead or is one forced to use the expansion port?
Re: Premier's Sprite Graphics Board
I'd say it could almost certainly be designed to go inside the Dragon - but it was seemingly designed the way it was (via a ribbon cable into the expansion port) to maintain compatibility with other systems.
-
- Posts: 45
- Joined: Thu Dec 10, 2009 8:15 pm
- Location: Seattle, USA (formerly Chester-le-Street, UK)
Re: Premier's Sprite Graphics Board
They look great, but 3 week lead time as they don't have stock. According to the tracking I'll have the prototyping boards this Saturday, and I've ordered a modulator-composite mod board from Tynemouth Software but that will take a week or two to get here. I'll probably just get to the meetup with boxes of bitsdublevay wrote: ↑Tue May 28, 2019 6:09 pm You can actually get edge connectors from Digikey, which can have IDC connectors pushed onto them. Might be simpler than having another board to do it.
Something like this...
https://www.digikey.co.uk/product-detai ... ND/4552097
-
- Posts: 45
- Joined: Thu Dec 10, 2009 8:15 pm
- Location: Seattle, USA (formerly Chester-le-Street, UK)
Re: Premier's Sprite Graphics Board
520 of these in stock though:
https://www.digikey.co.uk/product-detai ... ND/1922799
I'll check the US site.
https://www.digikey.co.uk/product-detai ... ND/1922799
I'll check the US site.
Re: Premier's Sprite Graphics Board
Those would probably do. And believe it or not, they were what I originally posted. It was only when I looked at what I'd actually bought that I posted the ones with the longer legs.
I think arriving at the computer museum with a box of bits will be just fine!
I think arriving at the computer museum with a box of bits will be just fine!
- binary_bit
- Posts: 1
- Joined: Thu May 30, 2019 7:58 pm
Re: Premier's Sprite Graphics Board
Did any one manage to get some pictures of the Sprite board, If so could they be posted.
-
- Posts: 45
- Joined: Thu Dec 10, 2009 8:15 pm
- Location: Seattle, USA (formerly Chester-le-Street, UK)
Re: Premier's Sprite Graphics Board
Here's what I posted to the Facebook thread:
I can take more though.
I can take more though.