I heard a clatter. So i open the case and the clatter comes from the Tano Dragon. So i open it.
The 4700µF 16V capacitor had come loose. See pictures. I will solder it him again.
IMHO was the problem, that there was no fill material in the transport box. The nice origin covering box was able to move back and forth in the transport box. So the cover is scratched
Then i have the idea: Can i simply swap the complete mains supply circuit with a Dragon 32 PAL version to get a Tano PAL variant?
Attachments
IMG_20130925_100342_cut.jpg (150.45 KiB) Viewed 5328 times
IMG_20130925_100120_cut.jpg (116.56 KiB) Viewed 5328 times
IMG_20130925_100031_cut.jpg (109.04 KiB) Viewed 5328 times
Last edited by jedie on Wed Sep 25, 2013 10:05 am, edited 1 time in total.
... too many ideas and too little time ... Related stuff written in Python:
Dragon 32 emulator / PyDC - Python Dragon 32 converter: https://github.com/jedie/DragonPy
DWLOAD server / Dragon-Lib and other stuff: https://github.com/6809
... too many ideas and too little time ... Related stuff written in Python:
Dragon 32 emulator / PyDC - Python Dragon 32 converter: https://github.com/jedie/DragonPy
DWLOAD server / Dragon-Lib and other stuff: https://github.com/6809
Nope you can't swap the power boards, as the connecting cable between the power board and the Tano mainboard is wired slightly differently.
If you made an adapter cable it might be possible, I did this with a spare tano board I had so I could use it in a spare 32 case, but from what I remember I was only using the monitor output, but like others have said it was still NTSC.