http://www.amazon.de/Scanalogic-PRO-Ana ... analogic+2
EDIT: From the homepage: http://www.ikalogic.com/ikalogic-products/scanalogic-2/
Basic information
Scanalogic-220 MSPS (Million samples per second).
Memory: 256 K samples per channel (1M samples total).
Number of channels: 4.
Possible configurations: 4 inputs, 4 outputs, 2 inputs and 2 outputs.
Trigger options
Pre-Trigger data display: 0% to 100% (allows to focus on post or pre-trigger data).
Trigger modes: Rising edge, Falling edge, Logic change on a specific channel, logic change on any channel.
Input and output characteristics
Supported input logic levels: 2V, 2.8V, 3V, 3.3V, 3.6V and 5V.
Allowed input voltage range: -0.7V to 5.5V.
Output voltage levels: 0V to 3.6V.
EDIT: Found this link: https://www.mikrocontroller.net/article ... e_Software to http://sigrok.org :
A list of supported devices is here: http://sigrok.org/wiki/Category:DeviceThe sigrok project aims at creating a portable, cross-platform, Free/Libre/Open-Source signal analysis software suite that supports various device types, such as logic analyzers, MSOs, oscilloscopes, multimeters, LCR meters, sound level meters, thermometers, hygrometers, anemometers, light meters, DAQs, dataloggers, function generators, spectrum analyzers, power supplies, GPIB interfaces, and more.
IKALOGIC Scanalogic-2 is supported: http://sigrok.org/wiki/IKALOGIC_Scanalogic-2
Maybe a better choice is: "Saleae Logic": http://sigrok.org/wiki/Saleae_Logic
8 channels and 24Mhz samplerate
Seems that is cheaper as the scanalogic 2: http://www.amazon.de/Generic-Saleae-Ana ... leae+Logic
about 18€
But the box looks different.
