![Smile :)](./images/smilies/icon_e_smile.gif)
When I say captured, what I did was patched the dragon cassette firmware to echo each byte read from tape up to my PC via a FT245, this appears at the dragon end as a simple IO port, and at the PC end as a USB serial port, I then captured it using a terminal program in binary mode and output to a cas file. I have ran the files through fixcas and tried them in mess and they work ok.
I tried doing tubway army, but that also patches the tape system, so failed, I'll have to look into that one under mess (I did manage to get the loader), that will help me determine to problem.
So is there anything that perticually needs sampling that I might have, as this way we get an exact image of what's on the tape.
Cheers.
Phill.