Page 1 of 1
WANTED: Dragon to TV Cable
Posted: Sat Nov 07, 2015 4:19 pm
by homeschooldragon
I managed to get an okay signal from my Dragon to the TV using a standard sized coax cable however I had to wedge the cable in one place as it looks like the original cable had a smaller diameter cable at the Dragon end.
Can anyone point me in the right direction of a correctly sized replacement please?
Many thanks.
Re: WANTED: Dragon to TV Cable
Posted: Sat Nov 07, 2015 11:28 pm
by sorchard
The Dragon end of the tv cable is a phono plug.
Something should turn up if you search for "dragon rf cable" on ebay.
Re: WANTED: Dragon to TV Cable
Posted: Sun Nov 08, 2015 12:06 am
by Alastair
If your TV has a composite image input or SCART socket then you could also try looking for a 5 pin DIN (for the monitor socket round the back of the Dragon) to whatever your TV accepts cable.
Re: WANTED: Dragon to TV Cable
Posted: Sun Nov 15, 2015 7:06 pm
by Rolo
It's really just an ordinary CINCH-connector. But better follow Alastair's solution and go for a DIN-5 (180°) to SCART-cable!