My controller from lafumat arrived today. Great work!
I found a old 3.5" Floppy drive. A Epson SMD-300. After i jumper it to "Drive select 0" it worked.
Jumper settings have i found here:
http://electrickery.xs4all.nl/comp/divc ... md-300.gif
But i get "RF ERROR"... In a shipped document form lafumat stands: That i have to "move slightly blue potentiometers" on this error.
But how?
It exist two blue potentiometers, see:
posting.php?mode=reply&f=5&t=774#pr4032
They described as
RV1 and
RV2
Found a post about RV1,RV2 in the Spain forum, here:
http://www.retrowiki.es/fororw/viewtopi ... 359#p33339
translate.google:
http://translate.google.com/translate?h ... ew%3Dprint :
The potentiometer RV1 must be positioned in its terminals 2 and 3 (the lower part of omniaje) measure 1.50 or 1.48 k. This potentiometer, apparently adjusts the voltage of writing, leg 33 WPW.
The potentiometer RV2 must be positioned in terminals 2 and 3 (the lower part of omniaje) measure 1.44 k. This potentiometer apparently adjusts voltage reading, RPW foot 18.
origin Spain text from the picture for
RV1:
Adjuste de 1,48 k o
desde 1,50 hasta 1,45
por estar montados da 4,15 k
en lugar de 100k
google translate this to:
1.48 Adjust k or
from 1.50 to 1.45
4,15, if installed da k
instead of 100k
origin Spain text from the picture for
RV2:
RV2 = 1,44 entre la pata 2 y 3
este es para el voltage de
lectura
google translate this to:
RV2 = 1.44 between the leg 2 and 3
this is for the voltage of
reading