When you measured that all keys worked as they should, did you measure directly on the PIA pins?
If you're into a bit of coding you could try checking the PIA by writing to the PIA port B and measure that it outputs the right values. And you can connect port A pins to low and high (without pressing any keys!) and read the values from the PIA.
Dragons Awake
Re: Dragons Awake
@Tormod
I happened to notice this post on another forum. I guess he's a busy guy and forgot to tell us the problem was solved
http://www.retrocomputermuseum.co.uk/fo ... 7#msg51387
I happened to notice this post on another forum. I guess he's a busy guy and forgot to tell us the problem was solved
http://www.retrocomputermuseum.co.uk/fo ... 7#msg51387
Stew