Hello everybody

A place to discuss everything Dragon related that doesn't fall into the other categories.
Post Reply
Andrew
Posts: 9
Joined: Thu May 20, 2010 8:53 pm

Hello everybody

Post by Andrew »

Hello everybody
iam Andrew from northallerton north yorkshire in the uk
The dragon32 was the first computer i bought and still enjoying it well the first one got stolen just the console
still got all the other bits could not bring myself to get rid .So i tracked down a new old stock dragon32 for £50
and that was 20ish years ago then got another from ebay took delivery of it i was very happy has it had been
modified to d64 spec with rs232port :D That my dragon story so far now just some questions
1)How do you get into d64 mode
2)Is it possible to get os9 or flex on it without a diskdrive

The archive is just amazing on what is on it .
Many thanks to all the people + volenteers to keep the dragon ALIVE
Many thanks Andrew
and some pics of the mod
Attachments
mod pics
mod pics
IMGA0064.JPG (57.01 KiB) Viewed 3371 times
mod pics
mod pics
IMGA0063.JPG (58.36 KiB) Viewed 3371 times
mod pics
mod pics
IMGA0059.JPG (56.2 KiB) Viewed 3371 times
mod pics
mod pics
IMGA0058.JPG (55.16 KiB) Viewed 3371 times
mod pics
mod pics
IMGA0056.JPG (56.68 KiB) Viewed 3371 times
User avatar
rolfmichelsen
Posts: 299
Joined: Wed Apr 08, 2009 8:43 pm
Location: Oslo, Norway
Contact:

Re: Hello everybody

Post by rolfmichelsen »

You'll get in into D64 mode by typing EXEC just after startup. The cursor should then change colour to blue. The D64 supplementary documentation can be found in the forum's Upload section.

No, you cannot use OS-9 or FLEX without a disketter drive (or something that looks like a disk drive to the D64).

-- Rolf
Andrew
Posts: 9
Joined: Thu May 20, 2010 8:53 pm

Re: Hello everybody

Post by Andrew »

Hi rolfmicheleson
Thank you for the quick reply tried the EXEC did not work it said ?FC ERROR
so its been upgraded but not to D64 spec ? a D32 with extra memory and rs232 port if thats what it is. If that is the case how do i get to use them.
Many thanks
Andrew
User avatar
rolfmichelsen
Posts: 299
Joined: Wed Apr 08, 2009 8:43 pm
Location: Oslo, Norway
Contact:

Re: Hello everybody

Post by rolfmichelsen »

Sorry, but I do not have any experience with this kind of upgraded D32. Anybody else? You might find some information in the book Inside the Dragon, appendix 5, that you can use to enable the extra memory. The book is available from the wiki.

-- Rolf
admin
Site Admin
Posts: 410
Joined: Thu Jul 17, 2008 10:22 pm

Re: Hello everybody

Post by admin »

This looks like its been upgraded to D64 spec, but does not have the D64 roms - so its booting straight into D32 BASIC. This sort of upgrade would have been used by either somebody writing their own code, and/or to run OS/9 and FLEX via disk as both need 64KB RAM and a Serial Port to boot.
Simon Hardy
Andrew
Posts: 9
Joined: Thu May 20, 2010 8:53 pm

Re: Hello everybody

Post by Andrew »

Hi rolfmicheleson + admin
Thanks for the replys i will look into inside the dragon book +
how would one get the D64 roms from as i would like it D64 :D
get the best of both worlds hopefully !! fingers crossed
Many thanks
Andrew
Post Reply