Re: Dragons Awake
Posted: Sat Oct 24, 2015 3:09 pm
When you measured that all keys worked as they should, did you measure directly on the PIA pins?
If you're into a bit of coding you could try checking the PIA by writing to the PIA port B and measure that it outputs the right values. And you can connect port A pins to low and high (without pressing any keys!) and read the values from the PIA.
If you're into a bit of coding you could try checking the PIA by writing to the PIA port B and measure that it outputs the right values. And you can connect port A pins to low and high (without pressing any keys!) and read the values from the PIA.